NRS6010T4R7N [TAIYO YUDEN]
SMD INDUCTORS SMALL AND LARGE CURRENT TYPE; 贴片电感小,大电流型型号: | NRS6010T4R7N |
厂家: | TAIYO YUDEN (U.S.A.), INC |
描述: | SMD INDUCTORS SMALL AND LARGE CURRENT TYPE |
文件: | 总12页 (文件大小:291K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Notice for TAIYO YUDEN productsꢀ
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■ Product information in this catalog is as of October 2009. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully be-
fore practical application or usage of the Products.
Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorpo-
rating such products, which are caused under the conditions other than those specified in this catalog or individual
specification.
■ Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is
available.
■ Please conduct validation and verification of products in actual condition of mounting and operating environment
before commercial shipment of the equipment.
■ All electronic components or functional modules listed in this catalog are developed, designed and intended for
use in general electronics equipment.(for AV, office automation, household, office supply, information service,
telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any
equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have
direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance.
Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, subma-
rine system, military, etc. where higher safety and reliability are especially required.
In addition, even electronic components or functional modules that are used for the general electronic equipment,
if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliabil-
ity evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to
install a protective circuit is strongly recommended at customer's design stage.
■ The contents of this catalog are applicable to the products which are purchased from our sales offices or distribu-
tors (so called“TAIYO YUDEN’s official sales channel”).
It is only applicable to the products purchased from any of TAIYO YUDEN’s official sales channel.
■ Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may oc-
cur in connection with a third party's intellectual property rights and other related rights arising from your usage of
products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights.
■ Caution for export
Certain items in this catalog may require specific procedures for export according to“Foreign Exchange and For-
eign Trade Control Law”of Japan,“U.S. Export Administration Regulations”, and other applicable regulations.
Should you have any question or inquiry on this matter, please contact our sales staff.
Should you have any question or inquiry on this matter, please contact our sales staff.
notice_e-01
SMD INDUCTORS SMALL AND LARGE CURRENT TYPE
REFLOW
■ FEATURES
■ APPLICATIONS
◦Small and Low profile inductor.
◦For small DC/DC converter
(cellular Phone, HDD, DVC, DSC, PDA, LCD display etc).
◦It corresponds to High current.
◦Simple and original magnetic shield structure.
◦Durable structure against dropping impact.
■ ORDERING CODE
N R H 2 4 1 0 T △ 1 0 0 M ○ ○ ○
❶
❷
❸
❹
❺
❻
❶Type
❷External dimensions
(W×L×H)
example
❸Packaging
Tape & Reel
❹Nominal inductance
〔μH〕
example
❺Inductance tolerance
❻Internal code
○○○ Standard products
○=Blank Space
NRH
T△
M
±20%
±30%
NRS Coating resin specification
NRV
△=Blank Space
N
2410
3010
3012
5012
5014
5020
6010
2.4×2.4×1.0mm
3.0×3.0×1.0mm
3.0×3.0×1.2mm
5.0×5.0×1.2mm
5.0×5.0×1.4mm
5.0×5.0×2.0mm
6.0×6.0×1.0mm
2R2
100
101
2.2
10
100
※R=decimal point
■ EXTERNAL DIMENSIONS/STANDARD QUANTITY
Δℓ
H
L
H
L
Δe
e
e
e
W
f
f
W
e
Δe
Standard
Quantity [pcs]
Tape & Reel
Standard
Quantity [pcs]
Tape & Reel
Type
L
W
H
e
f
Type
L
W
H
e
Δe
f
Δℓ
2.4±0.1
2.4±0.1
1.0 max
0.6±0.2
1.45±0.2
1.2 max
NRH2410
NRH3010
2500
2000
NRS5012
NRS5014
NRS5020
NRS6010
1000
1000
800
(0.047 max)
(0.095±0.004)(0.095±0.004)(0.039 max)(0.024±0.008)(0.057±0.008)
4.9±0.2
4.9±0.2
1.4 max
1.2±0.2
0.3±0.2
3.3±0.2
1.3±0.3
1.0 max
(0.039 max)
(0.193±0.008) (0.193±0.008) (0.055 max) (0.047±0.008) (0.011±0.008) (0.130±0.008) (0.051±0.011)
3.0±0.1
3.0±0.1
0.9±0.2
1.9±0.2
2.0 max
(0.079 max)
1.0 max
(0.118±0.004)(0.118±0.004)
(0.035±0.008)(0.075±0.008)
NRH3012
NRV3012
1.2 max
(0.047 max)
2000
6.0±0.2
6.0±0.2
1.35±0.2
0.3±0.2
4.0±0.2
2.3±0.3
Unit:mm(inch)
1000
(0.236±0.008)(0.236±0.008) (0.039 max) (0.053±0.008) (0.011±0.008) (0.157±0.008) (0.091±0.011)
Recommended Land Patterns
Unit:mm(inch)
【NRH2410】
【NR3010, NRH3012, NRV3012】
【NRS5012, NRS5014, NRS5020】
【NRS6010】
1.45
2.2
3.6
4.7
2.0
2.7
4.0
5.7
0.7
0.7
0.8
0.8
1.5
1.5
1.6
1.6
■ AVAILABLE INDUCTANCE RANGE
Type
NRH2410
NRH3010
NRH3012
NRV3012
NRS5012
NRS5014
NRS5020
NRS6010
Range
Imax
[mA]
Rdc±20% Imax
Rdc±20% Imax
Rdc±20% Imax
[Ω][mA]
Rdc±20% Imax
Rdc±20% Imax
[Ω][mA]
Rdc±20% Imax
Rdc±20% Imax
Rdc±20%
[Ω][mA]
[Ω][mA]
[Ω][mA]
[Ω][mA]
[Ω][mA]
[Ω]
1.0
2.2
4.7
1410
0.070 1480
0.065 1710
0.048
2300
0.053
2800
3600
0.021
1900
0.045
0.090
0.270
1100
0.120
850
1800
0.100
1300
450
300
0.690 600
1.47 380
0.350 720
0.770
0.270
0.420
0.120 1000
0.260
10
22
900
500
0.630
100
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound05_e-01
128
■ PART NUMBERS
●NRH 2410 Shielded type
Rated current ※)〔mA〕
EHS (Environmental
Hazardous
Self-resonant
frequency
〔MHz〕(min.)
Measuring
frequency
〔kHz〕
Inductance
[μH]
Inductance
Tolerance
DC Resistance
[Ω] (±20%)
Saturation
current
Idc1
Temperature rise
current
Ordering code
Substances
)
Idc2
NRH2410T R68NN 4
NRH2410T 1R0NN 4
NRH2410T 1R5MN
NRH2410T 2R2MN
NRH2410T 3R3MN
NRH2410T 4R7MN
NRH2410T 6R8MN
NRH2410T 100MN
NRH2410T 150MN
NRH2410T 220MN
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
0.68
1.0
1.5
2.2
3.3
4.7
6.8
10
120
106
94
77
56
50
43
32
27
0.060
0.070
0.110
0.150
0.220
0.290
0.410
0.690
1.02
2,200
1,800
1,550
1,290
1,000
880
1,570
1,410
1,160
970
±30%
770
100
670
±20%
750
570
550
450
15
470
370
22
22
1.47
390
300
●NRH 3010 Type
Rated current ※)〔mA〕
EHS (Environmental
Hazardous
Self-resonant
frequency
〔MHz〕(min.)
Measuring
frequency
〔kHz〕
Inductance
[μH]
Inductance
Tolerance
DC Resistance
[Ω] (±20%)
Saturation
current
Idc1
Temperature rise
current
Ordering code
Substances
)
Idc2
NRH3010T 1R2N
NRH3010T 1R5N
NRH3010T 2R2M
NRH3010T 3R3M
NRH3010T 4R7M
NRH3010T 6R8M
NRH3010T 100M
NRH3010T 150M
NRH3010T 220M
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.2
1.5
2.2
3.3
4.7
6.8
10
120
99
86
64
50
44
34
25
22
0.065
0.075
0.083
0.130
0.170
0.250
0.350
0.550
0.770
1,700
1,440
1,300
1,000
850
1,480
1,370
1,300
1,030
900
±30%
100
±20%
700
745
600
620
15
450
480
22
380
410
●NRH 3012 Type
Rated current ※)〔mA〕
EHS (Environmental
Hazardous
Self-resonant
frequency
〔MHz〕(min.)
Measuring
frequency
〔kHz〕
Inductance
[μH]
Inductance
Tolerance
DC Resistance
[Ω] (±20%)
Saturation
current
Idc1
Temperature rise
current
Ordering code
Substances
)
Idc2
NRH3012T 1R0N
NRH3012T 1R5N
NRH3012T 2R2M
NRH3012T 3R3M
NRH3012T 4R7M
NRH3012T 6R8M
NRH3012T 100M
NRH3012T 150M
NRH3012T 220M
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
6.8
10
111
95
78
61
50
43
32
26
22
0.048
0.055
0.075
0.100
0.130
0.190
0.270
0.450
0.630
2,200
1,700
1,500
1,200
1,000
850
1,710
1,600
1,370
1,210
1,060
890
±30%
100
±20%
730
720
15
530
570
22
500
500
●NRV 3012 Type
Rated current ※)〔mA〕
EHS (Environmental
Hazardous
Self-resonant
frequency
〔MHz〕(min.)
Measuring
frequency
〔kHz〕
Inductance
[μH]
Inductance
Tolerance
DC Resistance
[Ω] (±20%)
Saturation
current
Idc1
Temperature rise
current
Ordering code
Substances
)
Idc2
NRV3012T 2R2M
RoHS
2.2
±20%
70
0.120
1,800
1,100
100
●NRS 5012 Type
Rated current ※)〔mA〕
EHS (Environmental
Hazardous
Self-resonant
frequency
〔MHz〕(min.)
Measuring
frequency
〔kHz〕
Inductance
[μH]
Inductance
Tolerance
DC Resistance
[Ω] (±20%)
Saturation
current
Idc1
Temperature rise
current
Ordering code
Substances
)
Idc2
NRS5012T 1R0N
NRS5012T 1R5N
NRS5012T 2R2M
NRS5012T 3R3M
NRS5012T 4R7M
NRS5012T 6R8M
NRS5012T 100M
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
6.8
10
100
86
70
48
40
36
26
0.053
0.070
0.085
0.160
0.180
0.260
0.420
4,500
3,800
3,100
2,400
2,200
1,700
1,400
2,300
2,200
2,000
1,450
1,400
1,100
850
±30%
±20%
100
●NRS 5014 Type
Rated current ※)〔mA〕
EHS (Environmental
Hazardous
Self-resonant
frequency
〔MHz〕(min.)
Measuring
frequency
〔kHz〕
Inductance
[μH]
Inductance
Tolerance
DC Resistance
[Ω] (±20%)
Saturation
current
Idc1
Temperature rise
current
Ordering code
Substances
)
Idc2
NRS5014T 1R2N
NRS5014T 2R2N
NRS5014T 3R3N
NRS5014T 4R7N
RoHS
RoHS
RoHS
RoHS
1.2
2.2
3.3
4.7
86
56
48
41
0.045
0.065
0.080
0.100
3,800
2,800
2,350
2,050
2,800
2,300
2,100
1,800
±30%
100
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound05_e-01
129
■ PART NUMBERS
●NRS 5020 Type
Rated current ※)〔mA〕
EHS (Environmental
Hazardous
Self-resonant
frequency
〔MHz〕(min.)
Measuring
frequency
〔kHz〕
Inductance
[μH]
Inductance
Tolerance
DC Resistance
[Ω] (±20%)
Saturation
current
Idc1
Temperature rise
current
Ordering code
Substances
)
Idc2
NRS5020T 1R0N
NRS5020T 1R5N
NRS5020T 2R2N
NRS5020T 3R3N
NRS5020T 4R7M
NRS5020T 6R8M
NRS5020T 100M
NRS5020T 150M
NRS5020T 220M
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
6.8
10
81
68
57
46
37
30
24
20
17
0.021
0.026
0.035
0.048
0.060
0.090
0.120
0.165
0.260
4,000
3,350
2,900
2,400
2,000
1,600
1,300
1,100
900
3,600
3,200
2,900
2,400
2,000
1,650
1,450
1,200
1,000
±30%
±20%
100
15
22
●NRS 6010 Type
Rated current ※)〔mA〕
EHS (Environmental
Hazardous
Self-resonant
frequency
〔MHz〕(min.)
Measuring
frequency
〔kHz〕
Inductance
[μH]
Inductance
Tolerance
DC Resistance
[Ω] (±20%)
Saturation
current
Idc1
Temperature rise
current
Ordering code
Substances
)
Idc2
NRS6010T 1R5N
NRS6010T 2R2N
NRS6010T 3R3N
NRS6010T 4R7N
NRS6010T 6R8N
NRS6010T 100M
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.5
2.2
3.3
4.7
6.8
10
90
65
50
38
30
25
0.090
0.110
0.135
0.165
0.220
0.270
2,400
1,900
1,600
1,300
1,200
1,000
1,900
1,700
1,500
1,400
1,200
1,100
±30%
±20%
100
※)The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※)The temperature rise current value (Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※)The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound05_e-01
130
■ ELECTRICAL CHARACTERISTICS
DC Bias characteristics
■
(Measured by HP4285A)
NRH 3010
NRH 3012
NRV 3012
100
100
100
220M
220M
10
10
10
100M
4R7M
100M
4R7M
2R2M
2R2M
1R0N
2R2M
1
1
1
0.1
0.1
0.1
10
100
1,000
10,000
10
100
1,000
10,000
10
100
1,000
10,000
DC Bia〔s mA〕
DC Bia〔s mA〕
DC Bia〔s mA〕
NRS 5012
NRS 5014
NRS 5020
NRS 6010
100
100
100
100
200M
100M
4R7M
10
10
10
10
100M
100M
4R7M
4R7M
2R2M
4R7M
1R2N
2R2N
1R0N
2R2N
1
1
1
1
1R0N
0.1
0.1
0.1
0.1
10
100
1,000
10,000
10
100
1,000
10,000
10
100
1,000
10,000
10
100
1,000
10,000
DC Bia〔s mA〕
DC Bia〔s mA〕
DC Bia〔s mA〕
DC Bia〔s mA〕
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound05_e-01
131
■ PACKAGING
①Minimum Quantity
Type
Chip cavity
Insertion pitch
F
Tape thickness
Type
A
B
T
K
Standard Quantity [pcs]
Tape & Reel
2500
2000
2000
2000
5000
4500
3500
2000
1000
1000
800
1.4±0.1
(0.055±0.004)
NR 4010
NR 4012
NR 4018
NRG 4026
NRH 2410
NR 3010/NRH 3010
NR 3012/NRH3012/NRV3012
NR 3015
1.6±0.1
(0.063±0.004)
4.3±0.1
4.3±0.1
(0.169±0.004)(0.169±0.004)
2.1±0.1
(0.083±0.004)
NR 4010
0.3±0.05
3.1±0.1
NR 4012
(0.012±0.002)
(0.122±0.004)
NR 4018
1.4±0.1
(0.055±0.004)
1.6±0.1
(0.063±0.004)
2.3±0.1
(0.091±0.004)
4.2±0.1
(0.165±0.004)
NRG4026
NRS5012
NRS 5012
NRS 5014
NRS 5020
NR 5040
NRS 6010
5.25±0.1
5.25±0.1
NRS5014
(0.207±0.004)(0.207±0.004)
NRS5020
8.0±0.1
(0.315±0.004)
NR 5040
1500
1000
1000
2500
2000
1500
1000
5.15±0.1
5.15±0.1
NRS6010
(0.203±0.004)(0.203±0.004)
NR 6012
1.4±0.1
(0.055±0.004)
1.6±0.1
NR 6020
NR 6028
NR 6012
NR 6020
NR 6028
NR 6045
NR 6045
(0.063±0.004)
0.4±0.1
(0.016±0.004)
NR 8040
2.3±0.1
(0.090±0.004)
6.3±0.1
6.3±0.1
(0.248±0.004)(0.248±0.004)
3.1±0.1
(0.122±0.004)
②Tape Material
4.7±0.1
(0.185±0.004)
Unit : mm (inch)
◦Embossed tape 16mm wide (0.63 inches wide)
2.0±0.1
(0.079±0.004)
4.0±0.1
(0.157±0.004)
K
CHIP cavity
F
φ1.5±0.1
(0.059±0.004)
1.75±0.1
(0.069±0.004)
T
7.5±0.1
(0.295±0.004)
A
Electrode(bottom view)
③Taping dimensions
Chip cavity
Insertion pitch
F
Tape thickness
◦Embossed tape 8mm wide (0.315 inches wide)
Type
A
B
T
K
+0.1
ー0
CHIP cavity
φ1.5
1.75±0.1
(0.069±0.004)
8.3±0.1
8.3±0.1
12.0±0.1
0.5±0.1
4.5±0.1
K
+0.004
ー0
NR 8040
(0.059
)
(0.327±0.004) (0.327±0.004) (0.472±0.004) (0.020±0.004) (0.177±0.004)
T
Unit : mm (inch)
A
④Leader and Blank portion
◦NR, NRH, NRS, NRG, NRV
Blank portions
Chip cavity
Blank portions
Leader
Electrode(bottom view)
F
2.0±0.05
4.0±0.1
(0.079±0.002)(0.157±0.004)
Chip cavity
Insertion pitch
F
Tape thickness
Type
A
B
T
K
160mm or more
(6.3 inches or more)
100mm or more
(3.94 inches or more)
2.6±0.1
2.6±0.1
0.25±0.05
1.3±0.1
NRH 2410
(0.102±0.004)(0.102±0.004)
(0.009±0.002)(0.051±0.004)
NR 3010
NRH 3010
1.4±0.1
400mm or more
(15.8 inches or more)
(0.055±0.004)
4.0±0.1
NR 3012
NRH 3012
NRV3012
(0.157±0.004)
(0.126±0.004)(0.126±0.004)
Direction of tape feed
3.2±0.1
3.2±0.1
0.3±0.05
1.6±0.1
(0.012±0.002)(0.063±0.004)
1.9±0.1
(0.075±0.004)
NR 3015
Unit : mm (inch)
◦Embossed tape 12mm wide (0.47 inches wide)
+0.1
ー0
CHIP cavity
φ1.5
1.75±0.1
K
+0.004
ー0
(0.059
)
(0.069±0.004)
T
A
Electrode(bottom view)
F
2.0±0.1
4.0±0.1
(0.079±0.004)(0.157±0.004)
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound0405_pack_e-01
wound0405_pack-P1
■ PACKAGING
⑤Reel size
W
2±0.5
φ13±0.5
2.5 or less
(0.098inches
or less)
Reel size (Reference values)
Type
φD
φd
W
NRH2410
NR 3010
NRH 3010
180±0.5
(7.087±0.019)
60±1.0
(2.36±0.04)
10.0±1.5
(0.394±0.059)
NR 3012
NRH 3012
NRV 3012
NR 3015
NRS 5012
NRS 5014
NRS 5020
NRS 6010
NR 6012
180±3.0
(7.087±0.118)
60±2.0
(2.36±0.08)
14.0±1.5
(0.551±0.059)
Unit : mm (inch)
W
2±0.5
φ13±0.5
t
Reel size (Reference values)
Type
φD
φd
t (max.)
W
NR 4010
NR 4012
NR 4018
NRG 4026
NR 5040
NR 6020
NR 6028
NR 6045
18.5
(0.72)
13.5±1.0
(0.531±0.04)
330±3.0
80±2.0
(12.99±0.118) (3.15±0.078)
22.5
(0.89)
17.5±1.0
(0.689±0.04)
NR 8040
Unit : mm (inch)
⑥Top Tape Strength
The top tape requires a peel-off force of 0.1 to 1.3N in the direction of the arrow as
illustrated below.
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound0405_pack_e-01
wound0405_pack-P2
■ RELIABILITY DATA
1. Operating Temperature Range
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
ー25~+105℃
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
ー25~+120℃
ー25~+105℃
NR10050 Type
【Test Method and Remarks】
Including self-generated heat
2. Storage Temperature Range
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
ー40~+85℃
NR10050 Type
【Test Method and Remarks】
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type : 0 to 40℃ for the product with taping.
NR10050 Type : 0~40℃ for the product with taping.
3. Rated current
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
Within the specified tolerance
NR10050 Type
4. Inductance
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
Within the specified tolerance
NR10050 Type
【Test Method and Remarks】
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type : LCR Meter : HP 4285A or equivalent, Measuring frequency : Specified frequency
NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type : LCR Meter : HP 4285A or equivalent, 100KHz, 1V
NR10050 Type
: LCR Meter : HP 4263A or equivalent, 100KHz, 1V
5. DC Resistance
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
Within the specified tolerance
NR10050 Type
【Test Method and Remarks】
DC ohmmeter : HIOKI 3227 or equivalent
6. Self resonance frequency
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
Within the specification
NR10050 Type
【Test Method and Remarks】
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type :
Inpedance analyzer/material analyzer : HP4291A or equivalent HP4191A, 4192A or equivalent
7. Temperature characteristic
BRL2012, BRC2016, BRL2518, BRL3225, BRC2518, BRFL2518
Inductance change : Within ±15%
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
BRC1608
Inductance change : Within ±20%
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
Inductance change : Within ±20%
NR10050 Type
【Test Method and Remarks】
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type :
Measurement of inductance shall be taken at temperature range within -25℃~+85℃.
With reference to inductance value at +20℃., change rate shall be calculated.
Change of maximum inductance deviation in step 1 to 5
Temperature at step 1
Temperature at step 2
Temperature at step 3
Temperature at step 4
Temperature at step 5
20℃
Minimum operating temperature
20℃ (Standard temperature)
Maximum oparating temperature
20℃
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound0407_reli_e-01
wound0407_reli-RP1
■ RELIABILITY DATA
8. Resistance to flexure of substrate
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
No damage.
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
NR10050 Type
【Test Method and Remarks】
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type
:
The test samples shall be soldered to the test board by the reflow. As illustrated below, apply force in the direction of the arrow indicating until deflection of the test board
reaches to 2 mm.
Force Rod
20
10
Test board size
Test board material
: 100×40×1.0
: glass epoxy-resin
R230
Solder cream thickness : 0.12 (BR Series)
0.10 (NR30/40, NRV30, NRH24/30,NRG40)
0.15 (NR50/60/80, NRS50/60)
Board
Test Sample
R5
45±2mm
45±2mm
Land dimension(NR, NRS50)
Land dimension(BRL2012)
Land dimension(BRC1608)
Land dimension(BRL3225)
Land dimension(NR60, NRS60)
Land dimension(NR30, NRH30, NRV30)
0.9
4.0
1.4
2.7
2.7
5.7
0.8
0.55
0.55
1.5 2.1 1.5
0.8 1.4 0.8
1.6 3.1 1.6
0.65 0.9 0.65
1.0 1.6 1.0
Land dimension(BRL2518,BRC2518,BRFL2518) Land dimension(NRH24)
1.95 2.0
Land dimension(NR40, NRG40) Land dimension(NR80)
Land dimension(BRC2016)
3.7
7.5
1.8
0.7 0.8 0.7
0.65 1.5 0.65
0.7 0.75 0.7
1.2 1.6 1.2
1.8 3.8 1.8
Printed board thickness : 1.0mm
Unit : mm
9. Insulation resistance : between wires
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
NR10050 Type
10. Insulation resistance : between wire and core
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
NR10050 Type
11. Withstanding voltage : between wires and core
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
NR10050 Type
12. Adhesion of terminal electrode
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
Shall not come off PC board.
NR10050 Type
【Test Method and Remarks】
BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type
The test samples shall be soldered to the test board by the reflow.
:
・Applied force
: 10N to X and Y directions.
: 5s.
・Duration
10N, 5s
・Solder cream thickness : 0.15mm.
BRC1608, NR10050 Type :
・Applied force : 5N to X and Y directions.
・Duration
: 5s.
13. Resistance to vibration
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
Inductance change : Within ±10%
No significant abnormality in appearance.
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
NR10050 Type
【Test Method and Remarks】
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type :
The test samples shall be soldered to the test board by the reflow.
Then it shall be submitted to below test conditions.
Frequency Range
Total Amplitude
10~55Hz
1.5mm (May not exceed acceleration 196m/s2)
Sweeping Method
10Hz to 55Hz to 10Hz for 1min.
X
Time
Y
Z
For 2 hours on each X, Y, and Z axis.
Recovery : At least 2hrs of recovery under the standard condition sfter the test, followed by the measurement within 48hrs.
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound0407_reli_e-01
wound0407_reli-RP2
■ RELIABILITY DATA
14. Solderability
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
At least 90% of surface of terminal electrode is covered by new solder.
NR10050 Type
【Test Method and Remarks】
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050Type :
The test samples shall be dipped in flux, and then immersed in molten solder as shown in below table.
Flux : Methanol solution containing rosin 25%.
NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type :
Solder Temperature
Time
245±5℃
5±1.0 sec.
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type :
Solder Temperature
Time
245±5℃
5±0.5 sec.
※Immersion depth : All sides of mounting terminal shall be immersed.
15. Resistance to soldering heat
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
Inductance change : Within ±10%
NR30/40/50/60/80, NRV30, NRG40,
No significant abnormality in appearance.
NRH24/30, NRS50/60 Type
NR10050 Type
【Test Method and Remarks】
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type :
3 times of reflow oven at 230℃ MIN. for 40sec. with peak temperature at 260ー+05 ℃ for 5sec.
NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type
:
The test sample shall be exposed to reflow oven at 230±5℃ for 40 seconds, with peak temperature at 260±5℃ for 5 seconds, 2 times.
NR6020 Type :
The test sample shall be exposed to reflow oven at 230±5℃ for 40 seconds, with peak temperature at 250ー+05 ℃ for 5 seconds, 2 times.
Test board thickness : 1.0mm
Test board material : glass epoxy-resin
16. Thermal shock
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
Inductance change : Within ±10%
NR30/40/50/60/80, NRV30, NRG40,
No significant abnormality in appearance.
NRH24/30, NRS50/60 Type
NR10050 Type
【Test Method and Remarks】
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type :
The test samples shall be soldered to the test board by the reflow. The test samples shall be placed at specified temperature for specified time by step 1 to step 4 as shown
in below table in sequence. The temperature cycle shall be repeated 100 cycles.
Conditions of 1 cycle
Step
Temperature (℃)
ー40±3
Room temperature
Duration (min)
30±3
Within 3
1
2
3
4
+85±2
Room temperature
30±3
Within 3
17. Damp heat
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
Inductance change : Within ±10%
No significant abnormality in appearance.
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
NR10050 Type
【Test Method and Remarks】
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type :
Temperature
Humidity
Time
60±2℃
90~95%RH
1000 hours.
Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.
NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type :
The test samples shall be soldered to the test board by the reflow.
The test samples shall be placed in thermostatic oven set at specified temperature and humidity as shown in below table.
Temperature
Humidity
Time
60±2℃
90~95%RH
500±24hour
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound0407_reli_e-01
wound0407_reli-RP3
■ RELIABILITY DATA
18. Loading under damp heat
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
Inductance change : Within ±10%
No significant abnormality in appearance.
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
NR10050 Type
【Test Method and Remarks】
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type :
Temperature
Humidity
60±2℃
90~95%RH
Rated current
1000hours.
Applied current
Time
Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.
NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type :
The test samples shall be soldered to the test board by the reflow.
The test samples shall be placed in thermostatic oven set at specified temperature and humidity and applied the rated current continuously as shown in below table.
Temperature
Humidity
60±2℃
90~95%RH
Rated current
500±2hour
Applied current
Time
19. Low temperature life test
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
Inductance change : Within ±10%
No significant abnormality in appearance.
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
NR10050 Type
【Test Method and Remarks】
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type :
Temperature
Duration
ー40±2℃
1000hours
Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.
NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type :
The test samples shall be soldered to the test board by the reflow.
After that, the test samples shall be placed at test conditions as shown in below table.
Temperature
Time
-40±3℃
500±24hour
20. High temperature life test
BRC1608, BRL2012, BRC2016, BRC2518, Inductance change : Within ±10%
BRFL2518, BRL2518, BRL3225 Type
No significant abnormality in appearance.
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
Inductance change : Within ±10%
No significant abnormality in appearance.
NR10050 Type
【Test Method and Remarks】
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type :
Temperature
Duration
85±2℃
1000hours
Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.
NR10050 Type :
Temperature
Time
105±3℃
500±24hour
Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.
21. Loading at high temperature life test
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
Inductance change : Within ±10%
No significant abnormality in appearance.
NR10050 Type
【Test Method and Remarks】
NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type :
The test samples shall be soldered to the test board by the reflow soldering.
Temperature
Applied current
Time
85±2℃
Rated current
500±24hour
22. Standard condition
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
Standard test condition :
Unless otherwise specified, temperature is 20±15% and 65±20%of relative humidity.
When there are question concerning measurement result : In order to provide correlation date, the test shall be condition of 20±2℃
of temperature, 65±5% relative humidity.
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
Inductance is in accordance with our measured value.
NR10050 Type
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound0407_reli_e-01
wound0407_reli-RP4
■ PRECAUTIONS
SMD Inductors
1. Circuit Design
◆Operating environment
1.The products described in this specification are intended for use in general electronic equipment,(office supply equipment, telecommunications systems,
measuring equipment, and household equipment). They are not intended for use in mission-critical equipment or systems requiring special quality and high
reliability (traffic systems, safety equipment, aerospace systems, nuclear control systems and medical equipment including life-support systems,) where
product failure might result in loss of life, injury or damage. For such uses, contact TAIYO YUDEN Sales Department in advance.
Precautions
2. PCB Design
◆Land pattern design
1.Please refer to a recommended land pattern.
Precautions
◆Land pattern design
Technical
consider-
ations
Surface Mounting
・Mounting and soldering conditions should be checked beforehand.
・Applicable soldering process to this products is reflow soldering only.
3. Considerations for automatic placement
◆Adjustment of mounting machine
1.Excessive impact load should not be imposed on the products when mounting onto the PC boards.
Precautions
2.Mounting and soldering conditions should be checked beforehand.
Technical
consider-
ations
◆Adjustment of mounting machine
1. When installing products, care should be taken not to apply distortion stress as it may deform the products.
4. Soldering
Precautions
◆Reflow soldering
1. Please contact any of our offices for a reflow soldering, and refer to the recommended condition specified.
2. This products is reflow soldering only.
3. Please do not add any stress to a product until it returns in normal temperature after reflow soldering.
◆Lead free soldering
1.When using products with lead free soldering, we request to use them after confirming of adhesion, temperature of resistance to soldering heat, soldering etc
sufficiently.
◆Recommended conditions for using a soldering iron (NR10050 Type)
・Put the soldering iron on the land-pattern.
・Soldering iron's temperature - Below 350℃
・Duration - 3 seconds or less
・The soldering iron should not directly touch the inductor.
◆Reflow soldering
1. If products are used beyond the range of the recommended conditions, heat stresses may deform the products, and consequently degrade the reliability of
the products.
・BRC1608, BRL2012, BRL2518,
BRC2016, BRL3225 Type BRC2518, BRFL2518
Recommended reflow condition (Pb free solder)
・NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
Recommended reflow condition (Pb free solder)
・NR10050 Type
Recommended reflow condition (Pb free solder)
Technical
consider-
ations
5sec max
300
5sec max
300
5sec max
300
200
100
Peak:
Peak:
Peak:
150~180
150~180
150~180
260+0/ー5℃
250+0/ー5℃
250+5/ー0℃
200
200
100
30±10sec
30±10sec
230℃ min
30±10sec
230℃ min
100
230℃ min
90±30sec
90±30sec
90±30sec
0
0
0
Heating Time【sec】
Heating Time【sec】
Heating Time【sec】
5. Cleaning
Precautions
◆Cleaning conditions
1. Washing by supersonic waves shall be avoided.
Technical
consider-
ations
◆Cleaning conditions
1. If washing by supersonic waves, supersonic waves may cause broken products.
6. Handling
Precautions
◆Handling
1. Keep the product away from all magnets and magnetic objects.
◆Breakaway PC boards (splitting along perforations)
1. When splitting the PC board after mounting product, care should be taken not to give any stresses of deflection or twisting to the board.
2. Board separation should not be done manually, but by using the appropriate devices.
◆Mechanical considerations
1. Please do not give the product any excessive mechanical shocks.
2. Please do not add any shock and power to a product in transportation.
◆Pick-up pressure
1. Please do not push to add any pressure to a winding part. Please do not give any shock and push into a ferrite core exposure part.。
◆Packing
1. Please avoid accumulation of a packing box as much as possible.
◆Breakaway PC boards (splitting along perforations)
1. Planning pattern configurations and the position of products should be carefully performed to minimize stress.
◆Mechanical considerations
Technical
consider-
ations
1. There is a case to be damaged by a mechanical shock.
2. There is a case to be broken by the handling in transportation.
◆Pick-up pressure
1. Damage and a characteristic can vary with an excessive shock or stress.
◆Packing
1. There is a case that transformation and a product of tape are damaged by accumulation of a packing box.
7. Storage conditions
◆Storage
1. To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the storage area should
be controlled.
・Recommended conditions
Ambient temperature: 0~40℃
Precautions
Humidity
: Below 70% RH
The ambient temperature must be kept below 30℃. Even under ideal storage conditions, solderability of products electrodes may decrease as time passes.
For this reason, product should be used within 6 months from the time of delivery.
In case of storage over 6 months, solderability shall be checked before actual usage.
Technical ◆Storage
consider-
ations
1. Under a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes and deterioration of
taping/packaging materials may take place.
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound0407_reli_e-01
wound0407_reli-RP5
相关型号:
NRS6010T6R8MMGF
General Purpose Inductor, 6.8uH, 20%, 1 Element, Ferrite-Core, SMD, 2424, CHIP, 2424, ROHS COMPLIANT
TAIYO YUDEN
NRS6010T6R8MMGF8
SMD Power Inductors for Telecommunications Infrastructure and Industrial Equipment / Medical Devices (NR series S type)
TAIYO YUDEN
NRS6012T100MMGJ
General Purpose Inductor, 10uH, 20%, 1 Element, Ferrite-Core, SMD, 2424, CHIP, 2424, ROHS COMPLIANT
TAIYO YUDEN
NRS6012T100MMGJ8
SMD Power Inductors for Telecommunications Infrastructure and Industrial Equipment / Medical Devices (NR series S type)
TAIYO YUDEN
NRS6012T101MMGJ
General Purpose Inductor, 100uH, 20%, 1 Element, Ferrite-Core, SMD, 2424, CHIP, 2424, ROHS COMPLIANT
TAIYO YUDEN
NRS6012T101MMGJ8
SMD Power Inductors for Telecommunications Infrastructure and Industrial Equipment / Medical Devices (NR series S type)
TAIYO YUDEN
NRS6012T150MMGJ8
SMD Power Inductors for Telecommunications Infrastructure and Industrial Equipment / Medical Devices (NR series S type)
TAIYO YUDEN
NRS6012T1R0NMGJ8
SMD Power Inductors for Telecommunications Infrastructure and Industrial Equipment / Medical Devices (NR series S type)
TAIYO YUDEN
NRS6012T1R0NMGJV
General Purpose Inductor, 1uH, 30%, 1 Element, SMD, 2424, CHIP, 2424, HALOGEN FREE AND ROHS COMPLIANT
TAIYO YUDEN
©2020 ICPDF网 联系我们和版权申明